Skip to content


Polyester Tape, 2.5 Mil - Silicone Adhesive - 72 yards, High Temp. Resistant for Splicing, Masking or Holding Application, PFT25P

Original price $14.44 - Original price $664.27
Original price
$14.44 - $664.27
Current price $20.30
Size: 1/4 inch
Original price $14.44 - Original price $664.27
Original price
$14.44 - $664.27
Current price $20.30

Specifications for this item

Product Code PFT25P-PAElogation >90%
Material PolyesterCertification N/A
Adhesive Silicone Low Temperature -22 F
Thickness 2.5 Mil High Temperature 420 F
Length 72 Yards Core 3 inch
Adhesion 33 oz/inAdhesive Side Single Sided
Tensile Strenght 25 lbs/in
Product Code PFT25P-PA
Material Polyester
Adhesive Silicone
Thickness 2.5 Mil
Length 72 Yards
Adhesion 33 oz/in
Tensile Strenght 25 lbs/in
Elogation >90%
Certification N/A
Low Temperature -22 F
High Temperature 420 F
Core 3 inch
Adhesive Side Single Sided

Industrial Grade Polyester Card Splicing Tape & Printed Circuit Board Tape

Product Description

WOD PFT25P is a 1 mil translucent polyester film with 1.5 mils of silicone adhesive. Bonds quickly to silicone coated surfaces. Designed as a more stringent splicing tape for use on all types of substrates. Used in splicing of silicone treated papers, films and other substrates. Used for flexible circuit materials during manufacturing and subsequent processing, and as a protective maskant on panels subject to mild caustic or acid bath etching and plating.

Product Applications

  • Used for component packaging & electrical insulation, edge reinforcement on books, webs, and more
  • Used for masking adhesive seams in metal bonding processes
  • Protects surfaces from splashes and chemical fumes in tin/lead stripping and gold tab plating.
  • suitable for photo processing chemistry, acids, oils, solvents, aging, water immersion and staining.
  • For splicing siliconized papers, films and non-woven materials in converting.

Technical Properties

  • Adhesive: Fully cured silicone
  • Carrier/Backing: Polyester (PET) film
  • Thickness: 2.5 mils (carrier, adhesive)
  • Adhesion: 35 ounces per inch (to stainless steel test panel)
  • Tensile Strength: 25 pounds per inch (longitudinal)
  • Elongation: >90%
  • Service/Operating Temperature: -100°F to 350°F
  • Max Service/Operating Temperature (30 min.): 220°C (428°F)
  • Core: 3" Diameter

Additional Information

Alternative to: Scapa Finite 578; CAP SC-4055.

Note: Specifications are those given by manufacturers and are not tested for accuracy.