Scapa S301 High Tack Double Sided PVC Tape 8.5 Mil - 60 Yards

SCAPA S301 – HIGH TACK DOUBLE SIDED PVC TAPE

Scapa S301 is a double sided UPVC film tape coated on both sides with a high-tack, high-peel acrylic adhesive. The film and adhesive are clear; each roll has a white 60# kraft release liner. It is built for demanding bonding and splicing, product assembly, and lamination to EPDM rubber, plastics, glass, and urethane foams. The heavy adhesive coat helps fill gaps and grip rough or porous surfaces, including ether and ester foams, and it holds up well in tough service conditions. Rolls are wound on a 3 inch core and are sold by the roll or by the case. A 59 inch log (60 yards) is also available and is sold as a single roll.

Key Features

• 8.5 mil total thickness (exclusive of liner): 1.5 mil UPVC carrier with 3.5 mils of acrylic adhesive on each side
• Clear film and adhesive with a white 60# kraft release liner
• High tack and high peel for difficult bonding and splicing
• Conformable UPVC film with a heavy adhesive mass for gap filling
• Bonds well to rough, porous, and foam surfaces
• Service temperature: -40°F to 200°F
• 3 inch core; 60 yards per roll; slit sizes sold by the roll or by the case, plus a 59 inch log sold as a single roll

Applications

• Product assembly
• Demanding bonding and splicing
• Lamination to EPDM rubber, plastics, glass, and urethane foams

Technical Specifications

Total thickness: 8.5 mil (0.216 mm), exclusive of liner
Carrier: 1.5 mil UPVC film (clear)
Adhesive: High-tack, high-peel acrylic; 3.5 mil each side (clear)
Release liner: White 60# kraft, 3.5 mil
Peel adhesion: 136 oz/in (PSTC 101 Mod., 180°, initial to stainless steel; both sides)
Holding power: >600 min (PSTC 107, both sides)
Service temperature: -40°F to 200°F
Recommended application temperature: 65°F or above
Core: 3 inch
Color: Clear film and adhesive, white liner
Length: 60 yards

How to Apply

1. Make sure both surfaces are clean, dry, and free of oil, dust, powder, or release agents.
2. Apply the exposed adhesive to the first surface and rub down firmly.
3. Remove the liner, mate the second surface, and apply firm pressure.
4. For best results, apply only when the tape and both surfaces are at 65°F or above. Check performance before using on plasticized substrates.

Note: Specifications are those given by the manufacturer and are not independently tested for accuracy. Shelf life is one year from the date of shipment when stored in a cool, dry place below 76°F, with rolls stored on end.