□
Skip to content
Kapton Tape 1 Mil Silicone Adhesive - 36 yards, High Temperature - PKT1

Specifications for this item

Product Code PKT1-PAElogation 0.3
Material Polymide (Kapton)Certification UL510, MIL-P-46112B
Adhesive Silicone Low Temperature N/A
Thickness 2.6 Mil High Temperature 200 F
Length 36 Yards Core 3 inch
Adhesion 23.8 oz/inAdhesive Side Single Sided
Tensile Strenght >20.6 lbs/in
Product Code PKT1-PA
Material Polymide (Kapton)
Adhesive Silicone
Thickness 2.6 Mil
Length 36 Yards
Adhesion 23.8 oz/in
Tensile Strenght >20.6 lbs/in
Elogation 0.3
Certification UL510, MIL-P-46112B
Low Temperature N/A
High Temperature 200 F
Core 3 inch
Adhesive Side Single Sided

Kapton Tape 1 Mil Silicone Adhesive - 36 yards, High Temperature - PKT1

by WOD Tape
$3.12 - $362.88
$3.12

Roll Price:

$3.12 - $362.88
$3.12
Size: 1/4 inch
Quantity: Roll

Have questions about this product?

+1 786 565 9858

$3.12 - $362.88
$3.12

Roll Price:

$3.12 - $362.88
$3.12

Specifications for this item

Product Code PKT1-PAElogation 0.3
Material Polymide (Kapton)Certification UL510, MIL-P-46112B
Adhesive Silicone Low Temperature N/A
Thickness 2.6 Mil High Temperature 200 F
Length 36 Yards Core 3 inch
Adhesion 23.8 oz/inAdhesive Side Single Sided
Tensile Strenght >20.6 lbs/in
Product Code PKT1-PA
Material Polymide (Kapton)
Adhesive Silicone
Thickness 2.6 Mil
Length 36 Yards
Adhesion 23.8 oz/in
Tensile Strenght >20.6 lbs/in
Elogation 0.3
Certification UL510, MIL-P-46112B
Low Temperature N/A
High Temperature 200 F
Core 3 inch
Adhesive Side Single Sided

Kapton Polyimide Film Tapes

Product Description

WOD PKT1 Kapton™ Polyimide Film Tape is a 1 mil electrical grade Kapton alternative POLYIMIDE film coated with a high performance silicone adhesive. It is a wave solder/hot air leveling tape used to protect gold contacts on printed circuit boards from molten solder during hot air wave solder leveling process. It is thin and conformable, with outstanding tear and abrasion resistance at elevated temperatures. Adhesive will thermoset to increase adhesion values.

WOD PKT1 Leaves minimal residue when removed after manufacturing process; reduces clean-up time and minimizes rejects. Permits observation of board during processing. Kapton Electrical Grade/Printed Circuit Polyimide Film Tape has excellent resistance to acids, oils, solvents, aging, staining and water immersion.

The Adhesive Employs a proprietary technology that results in extremely low electrostatic discharge at unwind and removal from the PWB. Conventional polyimide tapes can typically generate over 10,000 volts during use which can damage board mounted electronic components. WOD tape PKT1 overcomes this problem without any of the typical drawbacks of conventional "anti-static" or "static-free" tapes (e.g., variable adhesion and opaqueness).

Product Applications

  • Primarily used in electrical insulation and gold finger protection.
  • Protects gold tabs in circuit boards during soldering.
  • Protects surfaces helping reduce replacement parts
  • Used in electrical applications such as harness/coil wraps & separators, transformers & slot liners where good insulation & heat resistance are required.

Technical Properties

  • Adhesive: High performance silicone
  • Carrier/Backing: Electrical grade polyimide film
  • Thickness: 2.6 mils (carrier, adhesive)
  • Adhesion: 23.8 ounces per inch (to stainless steel test panel)
  • Tensile Strength: > 20.6 pounds per inch (longitudinal)
  • Dielectric Strength: > 4,000 volts
  • Elongation: > 30%
  • Service/Operating Temperature: 14 F to 392 F
  • Specification Met: MIL-P-46112B; UL510 approved for flame retardance
  • Core: 3" Diameter

Additional Information

Alternative to: Dielectric Polymer NT-590; Permacel P-221; 3M 5419, 5433; Shurtape 6325-01; Scapa 557; St. Gobain/Furon 2345-1; Dewal 304-1; Ideal 9321, IT-7170; TLC CT961; Specialty Tapes S2210; Lanmar 595-1; Chemfab 360-1S; Tesa 4428.

Note: Specifications are those given by manufacturers and are not tested for accuracy.

FAQ

When will I receive my order?

The delivery time depends on your location and chosen shipping method:

  • Standard Shipping: 5-7 business days (Please note that some materials may require additional slitting and processing time).
  • Other Shipping Options: Transit time is calculated at checkout.

Please note that while we strive to deliver your order promptly, specific delivery times cannot be guaranteed. Rest assured, we are dedicated to ensuring your order arrives in optimal condition.

Can I get a sample before making a purchase?

Yes, we offer samples of certain products. Please contact our customer service team to request a sample via phone call at +1 786 565-9858  or email us at info@tapeproviders.com .

How can I contact Tape Providers customer service?

You can reach out to Customer Service team via phone call at +1 786 565-9858  or email us at info@tapeproviders.com .

What if my product didn't work for my application?

  • Within 30 Days: Return the item in brand new condition for a full refund (excluding shipping fees; restocking fee may apply).
  • Damaged Items: Provide photos of the damaged item and packaging for a replacement or refund.
  • Wrong Items: We'll send a return label and ship the correct item.
  • After 30 Days: Returns and refunds are not accepted.
  • Custom Orders: Refunds are only issued for errors made by Tape Providers (e.g., misspellings or design mistakes).

Do you offer bulk purchase discounts?

Yes, we offer discounts and special prices on bulk purchases. Please contact our customer service team for more information via phone call at +1 786 565-9858  or email us at info@tapeproviders.com .