□
Skip to content
Anti Slip Gip Tape Glow In The Dark - ASTB32GL

Anti Slip Gip Tape Glow In The Dark - ASTB32GL

by WOD Tape
$18.65 - $220.65
$18.65

(0 / Rolls Per Case)

$18.65 - $220.65
$18.65
Size: 1 inch
Color: Green

Have questions about this product ?

+1 786 565 9858

$18.65 - $220.65
$18.65

(0 / Rolls Per Case)

$18.65 - $220.65
$18.65

Specifications for this item

Product Code AST32G-PAElogation 25%
Material 60 Grit Silicon Carbide.Certification OSHA 1910.263, ASTM G154
Adhesive Acrylic Low Temperature N/A
Thickness 41 Mil High Temperature N/A
Length 20 Yards Core 3 inch
Adhesion >54 oz/inAdhesive Side Single Sided
Tensile Strenght 13 lbs/in
Product Code AST32G-PA
Material 60 Grit Silicon Carbide.
Adhesive Acrylic
Thickness 41 Mil
Length 20 Yards
Adhesion >54 oz/in
Tensile Strenght 13 lbs/in
Elogation 25%
Certification OSHA 1910.263, ASTM G154
Low Temperature N/A
High Temperature N/A
Core 3 inch
Adhesive Side Single Sided

Anti Slip or Non-skid Safety Grit Tape


Premium Non-Skid Tape is a 32 mil 60 grit silicone carbide high traction, anti-slip tape. This non-skid tape has a waterproof backing and is coated with an aggressive acrylic adhesive (more permanent than a synthetic rubber adhesive). WOD Non-Skid Tape is used indoors or out on stairs, pool areas, ramps, work areas, skateboards, and garage steps. The 60-grit silicone carbide surface is similar in feel to 60-grit sandpaper; therefore it is not appropriate for bare feet. NST-20C complies with OSHA 1910.263(3).

Also, please note the semi-transparent/translucent color is only partially transparent, while the white color is completely opaque. WOD NST-20C is not coated with an adhesive that can be submerged or put underwater. So if, when applied, there is any gaping, which would allow water to seep underneath to the underside of the tape, water would degrade the adhesive pretty quickly. Also, the substrate it is applied to must be dry, in good condition, and free of any debris when the tape is used so the adhesive bond can form correctly.

Tape is Available in 13 Vibrant Colors

Black - Black/Yellow - White - Clear - Gray - Red - Orange - Yellow - Green - Blue - Fluorescent Red - Fluorescent Orange - Fluorescent Yellow

How To Apply

1. Ensure that the surface is completely free from any debris. The best cleaning medium is a solvent such as isopropyl alcohol applied with a clean cloth. The surface should be dry and free from any loose particles. Prime and seal unpainted wood and concrete surfaces.

2. Cut the tape to the desired length and round the corners with scissors.

3. Peel release paper and place it in the desired location.
(When the temperature is low, please slowly heat with a hair dryer, and gum with good results)

Product Applications

  • Construction industry - Floor marking, Safety protection, and general purpose anti-slip needs.
  • Sure Step Anti-Slip cleats are essential in industrial enviroments, machine shops, and work areas to prevent dangerous and costly hazards.
  • Boating and RV industry - for Stairs and steps where non-skid application is needed when wet
  • For indoors or outdoors; on Walkways - Ramps - Stairways - in Machine shops - Work areas stairs - Pool areas - Skateboards - Garage steps

Technical Properties

  • Adhesive: Acrylic
  • Carrier/Backing: 60 grit silicone carbide
  • Release Liner: Paper
  • Thickness: 32 mils (carrier, adhesive)
  • Adhesion: 60 ounces per inch (to stainless steel test panel)
  • Tensile Strength: 36 pounds per inch (longitudinal)
  • Specification Met: OSHA 1910.263(3)
  • Core: 3" Diameter


Alternative to: 3M Safety Walk (tm), Jessup Safety Track (tm) 3100; TLC CT806.
Note: Specifications are those given by manufacturers and are not tested for accuracy.

FAQ

When will I receive my order?

The delivery time depends on your location and chosen shipping method:

  • Free Shipping: 5-7 business days (Please note that some materials may require additional slitting and processing time).
  • Other Shipping Options: Transit time is calculated at checkout.

Please note that while we strive to deliver your order promptly, specific delivery times cannot be guaranteed. Rest assured, we are dedicated to ensuring your order arrives in optimal condition.

Can I get a sample before making a purchase?

Yes, we offer samples of certain products. Please contact our customer service team to request a sample.

How can I contact Tape Providers customer service?

You can reach out to Customer Service team via phone call at +1 786 565-9858 or email us at info@tapeproviders.com .

What if my product didn't work for my application?

  • Within 30 Days: Return the item in brand new condition for a full refund (excluding shipping fees; restocking fee may apply).
  • Damaged Items: Provide photos of the damaged item and packaging for a replacement or refund.
  • Wrong Items: We'll send a return label and ship the correct item.
  • After 30 Days: Returns and refunds are not accepted.
  • Custom Orders: Refunds are only issued for errors made by Tape Providers (e.g., misspellings or design mistakes).

Do you offer bulk purchase discounts?

Yes, we offer discounts and special prices on bulk purchases. Please contact our customer service team for more information.