website
□
Skip to content
Polyester Tape, 3.5 Mil - Silicone Adhesive - 72 yards, High Temp. Resistant for Splicing, Masking or Holding Application, PFT35BS

Polyester Tape, 3.5 Mil - Silicone Adhesive - 72 yards, High Temp. Resistant for Splicing, Masking or Holding Application, PFT35BS

by WOD Tape
$12.86 - $568.08
$16.50
$12.86 - $568.08
$16.50
Size: 1/4 inch
$12.86 - $568.08
$16.50
$12.86 - $568.08
$16.50

Specifications for this item

Product Code PFT35BS-PAElogation 1.1
Material PolyesterCertification UL510 Class B
Adhesive Silicone Low Temperature -100 F
Thickness 3.5 Mil High Temperature 350 F
Length 72 Yards Core 3 inch
Adhesion 35 oz/inAdhesive Side Single Sided
Tensile Strenght 44 lbs/in
Product Code PFT35BS-PA
Material Polyester
Adhesive Silicone
Thickness 3.5 Mil
Length 72 Yards
Adhesion 35 oz/in
Tensile Strenght 44 lbs/in
Elogation 1.1
Certification UL510 Class B
Low Temperature -100 F
High Temperature 350 F
Core 3 inch
Adhesive Side Single Sided

Industrial Grade Polyester Card Splicing Tape & Printed Circuit Board Tape

Product Description

WOD PFT35BS is a 2 mil polyester film coated with a 1.5 mil residue-free silicone adhesive. It is one of the cleanest and strongest splicing tapes available with high tack and high adhesion. Good chemical and heat resistance. Bonds well to treated papers, films, foils, etc. Used for splicing siliconized papers, films and non-woven materials in converting. Used for masking adhesive seams in metal bonding processes.

Product Applications

  • Used for component packaging & electrical insulation, edge reinforcement on books, webs, and more
  • Used for masking adhesive seams in metal bonding processes
  • Protects surfaces from splashes and chemical fumes in tin/lead stripping and gold tab plating.
  • suitable for photo processing chemistry, acids, oils, solvents, aging, water immersion and staining.
  • For splicing siliconized papers, films and non-woven materials in converting.

Technical Properties

  • Adhesive: Fully cured silicone
  • Carrier/Backing: Polyester (PET) film
  • Thickness: 3.5 mils (carrier, adhesive)
  • Adhesion: 35 ounces per inch (to stainless steel test panel)
  • Tensile Strength: 44 pounds per inch (longitudinal)
  • Elongation: 110%
  • Dielectric Strength: 6,000 volts
  • Service/Operating Temperature: -100°F to 350°F
  • Max Service/Operating Temperature (45 min.): 225°C (437°F)
  • Specification Met: UL510 Class B (130°C / 266°F)
  • Core: 3" Diameter

Additional Information

Alternative to: Ideal 9209, 9211, 9212, 9249; TLC 934; 3M 8902, 8464; St. Gobain SP-2150, M830, M832; Scapa 572; Berry Plastics Polyken 781; Bondtec 293.

Note: Specifications are those given by manufacturers and are not tested for accuracy.